Linde Fork Lift Truck 74HP-55KW 804485 Turbocharger Turbo Brand New

  

Linde Fork Lift Truck 74HP-55KW 804485 Turbocharger Turbo Brand New. Turbospeed is a UK-based company that specializes in providing high-quality car parts.

With a team of experienced automotive professionals, Turbospeed prides itself on delivering top-notch products that are designed to help improve the performance and reliability of a wide range of vehicles. Whether you need a reconditioned turbochargers, injectors (diesel and petrol), High pressure pump or DPF. Turbospeed has the parts you need to get your car running at its best.

And with a commitment to providing excellent customer service and competitive prices, you can trust Turbospeed to provide the support and value you need. Please check the part numbers on your vehicle and compare them with the part numbers in our listing, to be sure you get the right part. If you are unsure about this please message us. After we receive your old turbocharger we will transfer surcharge back to your account. Old unit must conform to the following specifications.

Must be a complete unit (not dismantled). Turbocharger actuator must be in working order.

Must be free from cracks. TURBOCHARGERS ARE NOT RETURNABLE ONCE FITTED UNLESS SUBSEQUENTLY FOUND TO BE FAULTY. BY PURCHASING & FITTING THIS TURBOCHARGER? YOU AGREE TO ALL THE ABOVE TERMS & CONDITIONS OF SALE.

Ensure that any fault that caused the previous turbocharger to fail has been rectified. To prevent contamination of the replacement turbo, the oil feed pipe & banjo bolts MUST be replaced, irrespective of condition. The oil filter and engine oil must be renewed. Inspect the turbocharger oil drain pipe for kinks or carbon blockage. If in doubt, replace the pipe.

Remove all crankcase breather hoses and filters. Check and clean all inlet and outlet hoses. Oil sump and oil strainer must be cleaned Immobilize engine.

Using a clean container to catch the oil, crank the engine over until at least ½ pint (300 ml) of oil is pumped out of the turbo oil feed pipe. This ensures any dirt or carbon particles are flushed out, which otherwise may damage the turbocharger`s bearings. If incorrect, replace oil pump.

Unscrew oil sump, and check flow in oil strainer if needed change it. Replace breather filter if applicable. FOLLOW PROCEDURE TO INSTALL YOUR NEW TURBO. Ensure cleanliness whilst fitting this turbo. Do NOT remove the oil feed blanking plug until ready.

Do NOT use exhaust sealing paste or silicon. Connect the oil feed pipe (after completing point 6 above). Do not allow dirt to enter the turbocharger bearing housing.

Before fitting the oil drain pipe, ensure that the blanking plug is removed (where fitted) and crank engine until engine oil flows out of the turbocharger bearing housing. Re-fit the oil drain pipe. Before starting the engine, fill the oil chamber turbo with engine oil, ensure that the turbine bearing lubrication during initial start-up. Check all connections are tight, but do not over-tighten. Start engine and check for leaks.

Turbo Speed is an established importer of OEM quality replacement car parts and has been consistently supplying the public with excellent products coupled with a great service. We import directly, which enables us to sell our products at the best prices in the UK. If it is after 4 p. This item is in the category "Vehicle Parts & Accessories\Car Parts & Accessories\Air & Fuel Delivery\Turbos, Superchargers & Intercoolers\Turbos & Parts". The seller is "turbo-speed-parts" and is located in this country: GB. This item can be shipped to all countries in Europe.

1. Brand: Unbranded
2. Type: Turbocharger
3. Manufacturer Part Number: 804485-0002
4. Reference OE/OEM Number: 804485-0002, 8044850002, 804485 0002, 804485-5002S, 8044855002S, 804485 5002S